When the pressure release valve of your water heater is leaking, it can indicate problems or it might just be the water heating releasing some pressure. In some cases, it can be dangerous and require attention. In other situations, you shouldn’t worry at all.
Let’s examine this in more detail to make sure that your water heater works properly.
In extreme situations, it can even make your water heater explode! Read on for more information.
There are some things that you can check on your water heater (see below).
Sometimes you can’t fix it yourself though. If this happens, you may have to call a professional to clean up the damage and fix the leak. This can be a very expensive and difficult task, so make sure to get the help you need from an experienced plumbing company.
What is a pressure release valve in a hot water heater?
Water heaters use gas or electricity to warm up the water. Water expands once it heats up. To make sure that your water heater doesn’t explode, there is a pressure release valve. This can drip or leak water if needed to reduce the pressure. There is a overflow pipe connected to the pressure release valve to catch the water.
An overflow pipe is a tube that goes out of your water tank. Often this leaks when there is too much pressure in your water tank or pipes. It is also possible that there is a crack in your tank or that the temperature in the tank is too high.
The overflow drain often has a valve. You can test this valve by pushing it.
This might break the valve though so be careful when you do this. Given that a lot of things can be wrong when you have a leaking overflow pipe, it is best to call a plumber to troubleshoot the situation. It can be dangerous as a crack can evolve further.
Water is under a lot of pressure and this can flood your house in no time if your overflow valve is not connected to the drain. The overflow pipe is often connected with your drain so that the water can flow away easily but this is not always the case.
Even if this is done, it is possible that the drain is not able to process all the water.
Other people use an overflow pan that is connected to a drain. This water is not clean and might contain some acids so you shouldn’t touch it. Sometimes this drain runs outside the home. It can damage your curb appeal though as the water can leave stains. Some systems have two drains: one for the overflow pan and one for the pressure valve.
Plumbers can inspect your water heater to see possible problems in advance. This can help avoid issues such as a leaking overflow pipe. Water heaters can be expensive to repair and if you can avoid problems with an inspection, you might save a lot of money.
A lot of people don’t want to pay for maintenance and inspection. This can reduce the lifetime of their water heater and lead to problems such as a leaking overflow pipe. This is therefore a short-term mindset as you avoid paying the lower fee but might have to replace your expensive system earlier on.
How can a broken pressure release valve be dangerous?
A leaking or dripping pressure release can be dangerous because it can indicate that there is an issue with your water tank. Water tanks shouldn’t be leaking water all the time. This is a safety measure and shouldn’t be active all the time.
This water can drain your home. It is often not clean water either. It can leak from time to time but if it is leaking for a long time or a lot of water is leaking, you might want to call a plumber to check what is going on. Water heaters should be checked every year.
It can also attract termites as a moist environment attracts them. For this reason, it is essential that you stop the drains from leaking as soon as possible, especially during the summer.
What should you do if a pressure release valve is broken?
If you notice that your pressure release valve is leaking, you should check your water heater. It is possible that it shows an error code. Modern water heaters have a lot of sensors that can indicate if there is an error. If that is not the case, you can check the pressure gauge on your tank. If the pressure is high, you might want to call a plumber.
A water heater can explode if the pressure release valve is not working properly and there is too much pressure. A lot of things have to be broken at the same time for this to happen so in practice water heaters almost never explode.
What are the costs of a broken pressure release valve?
Water heaters can often be fixed. It might be needed to open it up though. Plumbers might charge anything between 200 USD to 500 USD, depending on what parts are needed.
If they have to replace the water heater, the price can run higher, from 2000 USD to 5000 USD. If you have an older water heater, it might be worth replacing it instead of fixing it. Water heaters often last about 10-15 years. Once it is hitting this time limit, you can look at replacing it.
The water that is leaking can contain acids so you have to be careful when you handle this. If it is leaking in your garage or cellar, you have to wear gloves and protective equipment when you clean it. This water can build up pretty fast. For this reason, you have to be careful that it doesn’t flood your house. It can cost a lot of money to get this fixed.
You can often hear the water running so it is quite noticeable. You can also use your hand to feel for wet spots if you think that it is leaking.
Adding a drip pan under your water heater can be a great idea. This makes sure that you can collect the water instead of it flowing on your floor.
Do you have to replace your boiler when this happens: how to fix
Check the error code on the display of your water heater. You can find more information about this in the manual of your hot water heater. This often indicates if something is wrong.
You can also take a look at the water pressure gauge to see if the water is under too much pressure.
If these things don’t solve the problem, you should contact a plumber to get your system checked. In most instances, it can be fixed but sometimes you will have to replace your water heater.
If your boiler is leaking water, you may have to replace it. Most boilers are designed to handle a certain amount of water before they need to be replaced. However, if your boiler is leaking water, it means that the pipe leading to the boiler is corroding and has started leaking water.
To conclude, a leaking pressure release valve can be dangerous. Some dripping can happen from time to time but if it is leaking a lot for a long time, it is time to get your water heater checked. It is possible that something cracked or needs to be replaced.
Water heaters have to deal with a lot of warmth and pressure. Over time things start to break down. A great inspection can reveal these problems in advance. You should let your water heater get inspected every year. This can reveal problems before they start to get worse.
You can often test the pressure release valve to make sure that it is still working. This is generally done by pushing a handle. Some plumbers don’t recommend this as pressure-release valves are quite fragile. They might jam while you are trying to test them. For this reason, it is important that you are careful when you handle the pressure release valve.
A pressure release valve is not that expensive but replacing it can be quite some work as you have to cut the water pipes open and drain them before you can work. In some cases it can be hard to reach this valve, making the repair harder to do. Plumbers can often replace this valve in 1 hour.
If you see that the pressure release valve is dripping often, it is a good idea to call a plumber. If the valve suddenly fails, it might lead to an explosion as your water heater is unable to release the pressure. While it doesn’t happen often, it can be dangerous and damage your house and lead to dangerous situations.